Inside Out (3D + 2D Blu-ray SteelBook) (Kimchidvd Collection No. 5) [Korea]

tnguyen13

Premium Supporter
Jan 26, 2014
783
NC, USA
Release date: December 21, 2015
Purchase links: Lenti - Full Slip Type A - Full Slip Type B
Price: $44.99
HDN Group Buy: hosted by @Kaka1888
Notes: Includes a 36 page booklet + character cards and art cards + numbered stickers.
Limit of 2 of each per customer

Lenti (1,000 copies) | Full Slip Type A (750 copies) | Full Slip Type B (750 copies)

12265967_1799241240303085_7750657040235401686_o.jpg 12265768_1799241360303073_6678662128495874280_o.jpg 12247971_1799241326969743_4365661774110731870_o.jpg

Pre-order date is the 26th of November (20:00) (Korean Time) - Time Zone Converter HERE12244563_1799241293636413_3458896313708645405_o.jpg
 
Last edited by a moderator:
Yeah it's the blu-fans lenti in the Kimchi slip. It looks like he has made a custom lenti magnet out of the Blufans slip to put in the Kimchi edition.

Not a magnet. I simply took it off the slip and cleaned out the residual glue from the blufans slip which then showed the same artwork as the lenti and sold that one with the Kimchi steel :p

@Apollon likes to make his ultimate editions!:D

Damn straight :D
 
Not a magnet. I simply took it off the slip and cleaned out the residual glue from the blufans slip which then showed the same artwork as the lenti and sold that one with the Kimchi steel :p



Damn straight :D
I wasn't sure it if was a magnet or not. Looks cool anyway mate!:D
 
  • Like
Reactions: IRON MAN
Not a magnet. I simply took it off the slip and cleaned out the residual glue from the blufans slip which then showed the same artwork as the lenti and sold that one with the Kimchi steel :p

Off topic, but others are probably interested, too: How did you take it off the slip? Did you take apart the slip? I'm asking because I got a few Blufans releases with misaligned lentis and I'm still contemplating how to remove them without damaging the cardboard. Any suggestions are welcome.
 
Off topic, but others are probably interested, too: How did you take it off the slip? Did you take apart the slip? I'm asking because I got a few Blufans releases with misaligned lentis and I'm still contemplating how to remove them without damaging the cardboard. Any suggestions are welcome.

The lenti's back is covered by a white paper and that paper is what's glued to the slip and to the lenti. I pulled gently on one corner of the lenti and continued all around the edges, then I started going more in depth towards the middle in between the lenti and the slip, until it came off. You need to be careful while pulling not to bend the lenti too much or it will leave a mark that can't be undone.

The slip then was showing some of that leftover white paper glued on and this is the not so fun part: I put goo gone on a cotton swab and started rubbing over those areas that still had the residual glue/paper. It took several rounds until the slip (where the lenti was stuck) became clean, then I just left it for a day, for the goo gone smell to go away, and that's it.

I did the same thing with BH6 https://www.hidefninja.com/communit...ook-editions-thread.91937/page-3#post-2063248
 
Thanks for the detailed answer @Apollon - much appreciated.
I experimented with a box cutter. It works fine, but the blade isn't long enough and I couldn't find a cutter with an adequate blade in the hardware store. So I'll try your approach next.