Independence Day (Blu-ray IronPack) [China]

[digitalbabe]

If you're not familiar, this was previously released with a typo ("I" missing). Then re-released, corrected.

Please note, I did not order from either of these sources (someone got mine for me and I just received it), but these may be the listings for it.

Amazon says "tin", which is the same way "Avatar" was listed, so it's likely the correct item.

Available here:

http://www.gouduo.com/ware_14565.html

Or:

http://www.amazon.cn/gp/product/B003VTYYNG/?tag=hidefninjacom-23
Amazon.con:

 

[surfury]

Can anyone post a photo of the inside of this ? I don't expect it to be an "error" version but I have a "rattler" on my error version and whilst I think this is gonna defeat me I want to try to reseat the discs if possible. Many thanks.

 

[Bigman]

What cataloging software do you use? I mainly use CATVids but I also use DVD Profiler and MyMovies too on the side.

MyMovies on mac, ipad and iphone, the best imo

 

[MayFlower]

I never realized how beautiful this piece until today

Wow, it feels great in my hand, it's heavy, smooth finish, feels like a true steel.

Love it...

 

[Munstarz40]

I never realized how beautiful this piece until today

Wow, it feels great in my hand, it's heavy, smooth finish, feels like a true steel.

Love it...

Damn May..what a tease..

 

[MayFlower]

trust me my friend. I know beauty when I see one...and this is one of them.

all the plastic and fake boobs covering this beauty ruin it...once I removed them...it said "love me for my true identity"

I hope you'll fall in love with it once we make the trade

Damn May..what a tease..

 

[Munstarz40]

trust me my friend. I know beauty when I see one...and this is one of them.

all the plastic and fake boobs covering this beauty ruin it...once I removed them...it said "love me for my true identity"

I hope you'll fall in love with it once we make the trade

I'm sure I will fall head over heels I China IPs

 

[discjunkie]

I don't get it - when did china become this big on Ironpacks? I mean back in the old days Japan was almost the only country that could get away with selling those super expensive steelbooks but nowadays it's like China and Thailand can too

 

[blu-steel]

IP's are no longer being made. They are extremely rare.

 

[HUBMUSWELL]

IP's are no longer being made. They are extremely rare.

Shame...

 

[surfury]

Seeing those photos, there's a chance I can pop the discs back if I'm careful. Still like to find a NON error version mind.

 

[HUBMUSWELL]

Seeing those photos, there's a chance I can pop the discs back if I'm careful. Still like to find a NON error version mind.

I've got a IP disc floater, ID I believe LOL. Surfury, if you succeed LMK your trick

 

[MayFlower]

It's impossible for you to pop it back in because there is a lever (one for each disc) that you need to pull back to clamp on it. Also, you need to slide it underneath a plastic pin. Mine was loose so that's why I had to open it up...no way for you to do it without opening it.

Seeing those photos, there's a chance I can pop the discs back if I'm careful. Still like to find a NON error version mind.

 

[blu-steel]

Seeing those photos, there's a chance I can pop the discs back if I'm careful. Still like to find a NON error version mind.

I got a non error version I will trade you for your error version.

 

[surfury]

I got a non error version I will trade you for your error version.

Err, no. Nice try though

---------- Post added at 10:03 PM ---------- Previous post was at 09:36 PM ----------

It's impossible for you to pop it back in because there is a lever (one for each disc) that you need to pull back to clamp on it. Also, you need to slide it underneath a plastic pin. Mine was loose so that's why I had to open it up...no way for you to do it without opening it.

I got ya May on that one, shame. I'm pretty good at relocating foating discs in Steels if I say so myself. Only been beaten by one by IP's like this are virtually impossible. I won't say impossible as I'm sure someone's done it !!

 

[bluraysteel]

Err, no. Nice try though

---------- Post added at 10:03 PM ---------- Previous post was at 09:36 PM ----------



I got ya May on that one, shame. I'm pretty good at relocating foating discs in Steels if I say so myself. Only been beaten by one by IP's like this are virtually impossible. I won't say impossible as I'm sure someone's done it !!

surfury you should make an utube video on how to fix a floater.
I have tried to fix it, but never sucessed. That bothers me lots.
Any tricks?

 

[MayFlower]

The reason why I said it's impossible because the plastic is different from the rest... there are 2 plastics in the left side that you need to slide under them, and then on the right side, there is another plastic that you need to pull back and use your other hand to snap it in place. You need to 2 hands to put them together. It took me 10 minutes, trying to figure how to assemble them....it's not the typical center snap hole...it doesn't even have that.

Err, no. Nice try though

---------- Post added at 10:03 PM ---------- Previous post was at 09:36 PM ----------



I got ya May on that one, shame. I'm pretty good at relocating foating discs in Steels if I say so myself. Only been beaten by one by IP's like this are virtually impossible. I won't say impossible as I'm sure someone's done it !!

 

[admiralakbar]

Is there anyone who knows where I can get one of these from? I have looked everywhere, but can't seem to find one for sale! Thanks.

 

[DJ IXS]

Oh man I want this!!!

 

[biscuitnoir]

Too bad it's not for sale anywhere and only pops up very rarely for trade.

Definitely a must have for the year to come.

Mission accomplished

I love it

 

[Drum18]

Mission accomplished
I love it

Stop bragging my friend, I know where you live...
It's next on my wishlist to get my hands on!