Jurassic World (3D+2D Blu-ray SteelBook) (FilmArena Collection #24) [Czech Republic]

[steel888]

Release date: December 21, 2015
Purchase link: FilmArena
Price: 799 CZK
Group buy: hosted by carllenc

Spoiler

 

[carllenc]

Official info from FilmArena

Hello, I promised update to Jurassic World edition on 2nd December. Yesterday, we received almost all Jurassic World components, but we did not get any info from supplier of lenti magnet. Today we have been communicating almost all day.

What we have ready or almost ready for JURASSIC WORLD:
Steelbooks are ready.
Collector's cards are ready.
Numbered plastic card are ready.
FullSlips are ready.
Photobooks are ready.
Tip-ons are ready.
3D poster cards we expect today to be delivered.
Lenticular magnets are delayed.

The supplier of lenti magnets has still been waiting for the magnet that was planned yesterday to be delivered. This is the reason why the lenticular sheet foils are not cut into single pieces yet. Because of this situation we had to reschedule the term of bonding and cutting for the end of next week. Finished magnets should be delivered to FA on 16th December and 17th starts completation. The first copies of Jurassic World should be shipped on Dec. 21.

The delay is also connected with JOHN WICK and TERMINATOR 5 lenticular magnets.

Here are rescheduled terms of shipping JOHN WICK and T5:
Dec. 17-18 JOHN WICK
Jan. 4 TERMINATOR 5

We are sorry for the delay. We have been doing our best to accelerate the delivery of lenticulars.

Thank you for understanding.

 

[McLarenSteel]

Thanks for the update, it'll be worth the wait.

 

[Steelselecta]

Official info from FilmArena

Hello, I promised update to Jurassic World edition on 2nd December. Yesterday, we received almost all Jurassic World components, but we did not get any info from supplier of lenti magnet. Today we have been communicating almost all day.

What we have ready or almost ready for JURASSIC WORLD:
Steelbooks are ready.
Collector's cards are ready.
Numbered plastic card are ready.
FullSlips are ready.
Photobooks are ready.
Tip-ons are ready.
3D poster cards we expect today to be delivered.
Lenticular magnets are delayed.

The supplier of lenti magnets has still been waiting for the magnet that was planned yesterday to be delivered. This is the reason why the lenticular sheet foils are not cut into single pieces yet. Because of this situation we had to reschedule the term of bonding and cutting for the end of next week. Finished magnets should be delivered to FA on 16th December and 17th starts completation. The first copies of Jurassic World should be shipped on Dec. 21.

The delay is also connected with JOHN WICK and TERMINATOR 5 lenticular magnets.

Here are rescheduled terms of shipping JOHN WICK and T5:
Dec. 17-18 JOHN WICK
Jan. 4 TERMINATOR 5

We are sorry for the delay. We have been doing our best to accelerate the delivery of lenticulars.

Thank you for understanding.

View attachment 204692 View attachment 204693 View attachment 204694 View attachment 204695 View attachment 204696

Ha ha! I was right then, all those boxes I saw in Filmarena yesterday was Jurassic worlds!! Damn, I wish I could of got a sneaky look in the boxes now, I could of uploaded photos of them here!!!

 

[satanclaus]

I'm gonna be honest here...I'd rather have it now and without the lenti...just sayin'...

 

[Hamill82]

Yes, merry christmas to you too Filmarena

 

[Actarus]

I rather wait and get a Perfect ''film arena Collection numbered edition'' for Jurassic World by them doing it the right way
and not skipping on quality.

I prefer them to take all the time they need, in Order to provide us nothing less but Packages with the Quality that we have been accustomed to,
nothing less than perfection.

 

[Flloydo]

Lentis look good,

Nice photos @Steelselecta
Love the Jurassic world pics in the Windows

 

[luke98]

I rather wait and get a Perfect ''film arena Collection numbered edition'' for Jurassic World by them doing it the right way
and not skipping on quality.

I prefer them to take all the time they need, in Order to provide us nothing less but Packages with the Quality that we have been accustomed to,
nothing less than perfection.

As an apology Film Arena need to give us a little peak at Jurassic Park 1-3

 

[hansgruber]

This is going to take longer to produce than the actual movie. What a joke.

 

[kryptonite]

I rather wait and get a Perfect ''film arena Collection numbered edition'' for Jurassic World by them doing it the right way
and not skipping on quality.

I prefer them to take all the time they need, in Order to provide us nothing less but Packages with the Quality that we have been accustomed to,
nothing less than perfection.

So you mean to tell us, if FA tells you, "Hey, @Actarus we need to delay this until 2020 so we can perfect everything," you are fine with that?

 

[Actarus]

So you mean to tell us, if FA tells you, "Hey, @Actarus we need to delay this until 2020 so we can perfect everything," you are fine with that?

we're not talking about Blufans delays here

 

[jeffster15]

 

[Aw 83]

Thanks for the update mate. Was not expecting this but what could be done apart from waiting this out know.

 

[kryptonite]

we're not talking about Blufans delays here

At least BluFans does not set a release date then postpones it multiple times. FA disappoints its consumers multiple times which is not good. If a competing retailer comes around with similar products but is more consumer friendly, I won't be surprised if majority jump ship.

 

[MrBMT]

FA disappoints its consumers multiple times which is not good.

They've already identified this as an issue, which is why they're changing the way they operate next year. With the products already pre-ordered they are obviously not able to do so.

"For upcoming editions, we plan to change the sequence of events compared to the previous model applied this year. In the beginning we present you the edition, then we start to manufacture its components and at a time when all the parts are made or confirmed delivery date of last part we are going to plan the start of pre-orders."

 

[kryptonite]

They've already identified this as an issue, which is why they're changing the way they operate next year. With the products already pre-ordered they are obviously not able to do so.

"For upcoming editions, we plan to change the sequence of events compared to the previous model applied this year. In the beginning we present you the edition, then we start to manufacture its components and at a time when all the parts are made or confirmed delivery date of last part we are going to plan the start of pre-orders."

It remains to be seen if they will be any different next year. Perhaps they shouldn't be posting release dates until the final products are available for shipping.

 

[Actarus]

It remains to be seen if they will be any different next year. Perhaps they shouldn't be posting release dates until the final products are available for shipping.

Even if they Post-poned 2 or 3 times as they usually do, it is about a 10 day period each time as per previous releases,
Still 10x faster than Blufans 1 x Delay for Blufans is 6 months and above.

 

[Steelselecta]

Taxi is about to pick us up from the hotel and take us to Prague airport.. Would highly recommend Prague to anyone!!!! Bye bye Prague & Filmarena, will defo be back!!

 

[Actarus]

Taxi is about to pick us up from the hotel and take us to Prague airport.. Would highly recommend Prague to anyone!!!! Bye bye Prague & Filmarena, will defo be back!!

Oh that must be rough, it seems such a beautiful Place... but at least you were lucky enough to see this beautiful Place that some of us can only dream of...

 

[kryptonite]

Even if they Post-poned 2 or 3 times as they usually do, it is about a 10 day period each time as per previous releases,
Still 10x faster than Blufans 1 x Delay for Blufans is 6 months and above.

Bottom line is no release dates should be announced when the product is still under production.