STARKILLER--1138's STARKILLER BASE

[STARKILLER 1138]

STARKILLER--1138's

STARKILLER BASE

Welcome to my Star Wars Memorabilia based home theater room. Star Wars is what got me into HT, and now into collecting Star Wars statues, 1:1 busts, and dioramas from Sideshow Collectibles. I update as new product arrives so check back now and then. Thank you for visiting and enjoy:

Shelving - Ikea Besta Bookcases with Vassbo Doors
TV Stand - Transdeco TD655B
Star Wars Collection - Sideshow Collectibles, Code 3, and others
TV - Vizio E600i-B3
Bluray - PS3 Slim
Receiver - Yamaha RX-V663
7ch Amp - Emotiva UPA-7
Speakers - Energy CB-10's (6)
Sub - M&K MX-350THX
Cables / Interconnects - Monoprice



Me!

​

 

[SithLord84]

Yeah, SMG is voicing the character. I remember how everyone was so sure the female Inquisitor was Ventress, LOL! FWIW, without revealing any spoilers, I can guarantee Ventress will not be in Rebels. Neither will Talzin. Maul still could though.

You know I hope Maul shows up . Thats one way I can guarantee that I'll watch the show lol.

 

[STARKILLER 1138]

Oh nice! Under Armour makes superhero shirts too. I tried a fitting Superman one on once...my midsection could not pull that shirt off, ha.

Hey where do you display your lightsabers? I know you got the Kylo Ren one, do you mount them on the wall?

Don't have any yet, but I would mount them on the wall if I did. Probably on both sides of the TV.

I've seen some people in the gym with the Superhero UA shirts. They look awesome!

You know I hope Maul shows up . Thats one way I can guarantee that I'll watch the show lol.

You have to wonder if it is just a matter of time. Very happy to read that Maul is still alive!

 

[SithLord84]

Don't have any yet, but I would mount them on the wall if I did. Probably on both sides of the TV.

I've seen some people in the gym with the Superhero UA shirts. They look awesome!

You have to wonder if it is just a matter of time. Very happy to read that Maul is still alive!

Thats good to hear!

 

[terp_fan99]

Don't have any yet, but I would mount them on the wall if I did. Probably on both sides of the TV.

I've seen some people in the gym with the Superhero UA shirts. They look awesome!



You have to wonder if it is just a matter of time. Very happy to read that Maul is still alive!

Oh, for some reason I thought you bought the Kylo Ren saber. I'm losing my mind here.

Well I took the plunge on the black series and ordered the first wave from BBTS. Now wondering if I can mount them horizontally without worrying about the blades bending. Here's the link if you want to join me in popping your lightsaber cherry:


http://www.bigbadtoystore.com/bbts/product.aspx?product=ZRTY10068&mode=retail

 

[SithLord84]

Oh, for some reason I thought you bought the Kylo Ren saber. I'm losing my mind here.

Well I took the plunge on the black series and ordered the first wave from BBTS. Now wondering if I can mount them horizontally without worrying about the blades bending. Here's the link if you want to join me in popping your lightsaber cherry:


http://www.bigbadtoystore.com/bbts/product.aspx?product=ZRTY10068&mode=retail

Oh man, those are going to be awesome! Embrace your inner 6 year old LOL!

You're going to need a lightsaber wall mount. They sell them here: http://www.saber-stand.com/ They come with a piece that holds the blade too so it won't bend.

 

[STARKILLER 1138]

Thats good to hear!

Smart not to kill off one of the most popular characters.

Oh, for some reason I thought you bought the Kylo Ren saber. I'm losing my mind here.

Well I took the plunge on the black series and ordered the first wave from BBTS. Now wondering if I can mount them horizontally without worrying about the blades bending. Here's the link if you want to join me in popping your lightsaber cherry:


http://www.bigbadtoystore.com/bbts/product.aspx?product=ZRTY10068&mode=retail

Goddamn! I just want the Kylo saber! LOL! Found it though and ordered. Thanks for the link!

Oh man, those are going to be awesome! Embrace your inner 6 year old LOL!

You're going to need a lightsaber wall mount. They sell them here: http://www.saber-stand.com/ They come with a piece that holds the blade too so it won't bend.

Cool! I think they are cheaper than ThinkGeek.

 

[terp_fan99]

Oh man, those are going to be awesome! Embrace your inner 6 year old LOL!

You're going to need a lightsaber wall mount. They sell them here: http://www.saber-stand.com/ They come with a piece that holds the blade too so it won't bend.

Awesome! Thanks for the link. I was reading through that site and they still say not to display them horizontally because they will bend.

Smart not to kill off one of the most popular characters.



Goddamn! I just want the Kylo saber! LOL! Found it though and ordered. Thanks for the link!



Cool! I think they are cheaper than ThinkGeek.

Nice! I've actually seen that Kylo saber at Target so keep an eye out next time you're there. Now you need the Anovos mask to go with it

http://www.anovos.com/products/star-wars-the-force-awakens-kylo-ren-helmet-accessory-pre-order

 

[SithLord84]

Smart not to kill off one of the most popular characters.

Goddamn! I just want the Kylo saber! LOL! Found it though and ordered. Thanks for the link!

Cool! I think they are cheaper than ThinkGeek.

Well even if they kill a popular character off they can always find a way to bring them back like they did with Maul LOL.

I don't think TinkGeek makes them anymore. I haven't seen them on the website in months.

Awesome! Thanks for the link. I was reading through that site and they still say not to display them horizontally because they will bend.

Nice! I've actually seen that Kylo saber at Target so keep an eye out next time you're there. Now you need the Anovos mask to go with it

http://www.anovos.com/products/star-wars-the-force-awakens-kylo-ren-helmet-accessory-pre-order

I totally missed the part where you said you wanted to mount them horizontally lol. I don't know if I've ever seen anyone mount them that way, I think it would be pretty impossible to mount them that way without the blade bending.

Oh man that looks awesome, but that price tag! . Its even more expensive then their Vader one. Not only that but thats the introduction tier price, after November it goes up to $700!

I think if I get a Kylo helmet I'll stick to the Black Series one:

 

[terp_fan99]

Well even if they kill a popular character off they can always find a way to bring them back like they did with Maul LOL.

I don't think TinkGeek makes them anymore. I haven't seen them on the website in months.



I totally missed the part where you said you wanted to mount them horizontally lol. I don't know if I've ever seen anyone mount them that way, I think it would be pretty impossible to mount them that way without the blade bending.

Oh man that looks awesome, but that price tag! Not only that but thats the introduction tier price, after November it goes up to $700!

I think if I get a Kylo helmet I'll stick to the Black Series one:

Yeah I think I'll just mount them vertically in between the movie posters like I saw on that site.

I saw someone mention a black series Kylo Ren mask on another site, but I couldn't find it anywhere for order! Do you know any details on that like release date or anything?

EDIT: Nevermind I found it. It was listed as voice changer helmet on BBTS.

 

[SithLord84]

Yeah I think I'll just mount them vertically in between the movie posters like I saw on that site.

I saw someone mention a black series Kylo Ren mask on another site, but I couldn't find it anywhere for order! Do you know any details on that like release date or anything?

EDIT: Nevermind I found it. It was listed as voice changer helmet on BBTS.

Yeah, it is a voice changer unfortunately. But it would still pair really well with the Kylo Black Series Saber that makes noise lol. You could always just not install batteries to the helmet and it would make it much more of a grown up collectible. It looks pretty nice, especilly since its like $600 cheaper than the other one LOL.

 

[terp_fan99]

Yeah, it is a voice changer unfortunately. But it would still pair really well with the Kylo Black Series Saber that makes noise lol. You could always just not install batteries to the helmet and it would make it much more of a grown up collectible. It looks pretty nice, especilly since its like $600 cheaper than the other one LOL.

Yeah it looks good. All you would need after that is the black robe.

By the way, I love your new avatar.

 

[SithLord84]

Yeah it looks good. All you would need after that is the black robe.

By the way, I love your new avatar.

Thanks man! I took it from what is I think a Spanish promo photo.

Now all they need to do is release The Black Series Kylo Ren rest of the outfit LOL.

 

[STARKILLER 1138]

Awesome! Thanks for the link. I was reading through that site and they still say not to display them horizontally because they will bend.



Nice! I've actually seen that Kylo saber at Target so keep an eye out next time you're there. Now you need the Anovos mask to go with it

http://www.anovos.com/products/star-wars-the-force-awakens-kylo-ren-helmet-accessory-pre-order

SWEET! Damn the price is high, but I gotta have it! I saw the First Order Trooper bucket too. Still deciding on that one.

Well even if they kill a popular character off they can always find a way to bring them back like they did with Maul LOL.

I don't think TinkGeek makes them anymore. I haven't seen them on the website in months.



I totally missed the part where you said you wanted to mount them horizontally lol. I don't know if I've ever seen anyone mount them that way, I think it would be pretty impossible to mount them that way without the blade bending.

Oh man that looks awesome, but that price tag! . Its even more expensive then their Vader one. Not only that but thats the introduction tier price, after November it goes up to $700!

I think if I get a Kylo helmet I'll stick to the Black Series one:

The Black Series one will be a nice alternative if funds are an issue for the Anovos one. Wish someone would make a DOT compliant version of this.

LMAO! That's true. I guess there is hope that they will bring back Ventress then.

 

[SithLord84]

SWEET! Damn the price is high, but I gotta have it! I saw the First Order Trooper bucket too. Still deciding on that one.



The Black Series one will be a nice alternative if funds are an issue for the Anovos one. Wish someone would make a DOT compliant version of this.

LMAO! That's true. I guess there is hope that they will bring back Ventress then.

That would be awesome if they could make one! But if not i'm sure you can find someone who does some kind of custom Star Wars helmet wraps.

I hope Anovos make a Phasma helmet for you Lou.

 

[STARKILLER 1138]

That would be awesome if they could make one! But if not i'm sure you can find someone who does some kind of custom Star Wars helmet wraps.

I hope Anovos make a Phasma helmet for you Lou.

Me too!

I've seen some custom paint apps for helmets to resemble Stormtroopers and Boba Fett, but they really aren't what I'm looking for. That Kylo helmet, along with the First Order Trooper helmet, just screams to be made into a DOT compliant helmet.

 

[terp_fan99]

SWEET! Damn the price is high, but I gotta have it! I saw the First Order Trooper bucket too. Still deciding on that one.



The Black Series one will be a nice alternative if funds are an issue for the Anovos one. Wish someone would make a DOT compliant version of this.

LMAO! That's true. I guess there is hope that they will bring back Ventress then.

Yeah that price is way too steep for me. I love the Anovos stuff, but I think it's all way over priced.

What is a DOT compliance version?

 

[SithLord84]

Me too!

I've seen some custom paint apps for helmets to resemble Stormtroopers and Boba Fett, but they really aren't what I'm looking for. That Kylo helmet, along with the First Order Trooper helmet, just screams to be made into a DOT compliant helmet.

I agree the custom painted ones are just kind of meh. But I guess they are better than nothing.

Hope they can pull off making the new helmets into motorcycle ones though.

Yeah that price is way too steep for me. I love the Anovos stuff, but I think it's all way over priced.

What is a DOT compliance version?

Lou will be able to elaborate on this lol, but its basically a helmet that complies with the Department of Transportation's requirements.

 

[terp_fan99]

I agree the custom painted ones are just kind of meh. But I guess they are better than nothing.

Hope they can pull off making the new helmets into motorcycle ones though.



Lou will be able to elaborate on this lol, but its basically a helmet that complies with the Department of Transportation's requirements.

Oh he wants to wear it as a motorcycle helmet. I'm on the same page now, sorry I'm tired today!

 

[STARKILLER 1138]

Yeah that price is way too steep for me. I love the Anovos stuff, but I think it's all way over priced.

What is a DOT compliance version?

I agree the custom painted ones are just kind of meh. But I guess they are better than nothing.

Hope they can pull off making the new helmets into motorcycle ones though.



Lou will be able to elaborate on this lol, but its basically a helmet that complies with the Department of Transportation's requirements.

Oh he wants to wear it as a motorcycle helmet. I'm on the same page now, sorry I'm tired today!

LMAO! I see some guys wearing Predator helmets. Some SW ones would be nice. Yeah, the custom ones ar meh for sure!

 

[SithLord84]

Dude, wearing a Predator helmet would look so cool on a bike LOL.