The Martian (3D+2D Blu-ray SteelBook) (FilmArena Collection #28) [Czech Republic]

carllenc

Premium Supporter
Oct 22, 2011
11,272
Czech Republic
Release date: March 29, 2016 (FAC) - April 1, 2016 (Unnumbered)
Purchase link: FAC - Unnumbered
Price: 899 CZK
Notes: Numbered FAC edition limited to 1000 copies - Unnumbered edition limited to 396 copies
Group buy: FAC (CLOSED - FULL), Unnumbered (CLOSED - FULL)

PLEASE USE THIS TIMEZONE CONVERTER.

M1.jpg12735875_1284658674884017_238350934_n.jpg
 
Last edited by a moderator:
I see so even though they don't have numbers they are more limited?

Yes, the Un-Numbered Print Run was supposed to be 1000 and numbered 2000. Due to unforeseen circumstances(as they received a huge part of the steels damaged), they had to do the best they could with what they had. So they reduced the print run for the numbered edition from 2000 units to 1000 units. For the Un-Numbered edition, they could only salvage 396 copies. It was the best solution. So if you look at the beautyshot of the Un-Numbered edition you will see it states the print run of 396 making it more limited. Although the numbered edition is very well sought after since the print run was cut in half. It is not film arena's fault, they received damaged copies that could not be replaced. Nice quality control at least we know each steel inside a fullslip will be in Mint Condition.

Screen shot 2016-03-24 at 10.13.26 AM.png
 
Last edited:
Yes, the Un-Numbered Print Run was supposed to be 1000 and 2000 for the singles. Due to unforeseen circumstances(as they received a huge part of the steels damaged), they had to do the best they could with what they had. So they reduced the print run for the numbered edition from 2000 units to 1000 units. For the Un-Numbered edition, they could only salvage 396 copies. It was the best solution. So if you look at the beautyshot of the Un-Numbered edition you will see it states the print run of 396 making it more limited. Although the numbered edition is very well sought after since the print run was cut in half. It is not film arena's fault, they received damaged copies that could not be replaced. Nice quality control at least we know each steel inside a fullslip will be in Mint Condition.

View attachment 229688

Woah thanks for the detail dude!! I hope FA got compensation from the steelbook manufacturer!

I got another question but I'm going off topic a bit so will post it on the FA thread.
 
I prefer the Kimchi full slip over the unnumbered FA personally (they both pretty much use the same artwork)