Share how you modify your Steelbooks here.
Last edited by a moderator:
Modifying SteelBooks
- Thread starter Stuntastik30
- Start date
^ Double sided tape sounds like a great idea, and not messy like glue can get... Hmmm i guess i'll also have to find a hair dryer too. Thanks 
I agree with Kelly 
Some more done
Some more done
What size do inside art prints need to be if im not touching the spine and just having two separate inserts? Also whats the best way to print them and does anyone have a good site they use?
Finally does anyone have ideas for Hunger Games, In Time, Drive and Rise of Planet of Apes internal art in this way? Cheers
Finally does anyone have ideas for Hunger Games, In Time, Drive and Rise of Planet of Apes internal art in this way? Cheers
Last edited:
Alright people any thoughts of these images for inside V for Vendetta
Leaning on this one
or, mainly
The only problem with this one is there is the art creaters signature riught where the hidef upload thing is but that would show up in the inside :/
or, mainly
The only problem with this one is there is the art creaters signature riught where the hidef upload thing is but that would show up in the inside :/
Last edited by a moderator:
OK, Here is my V for Vendetta. Only my second spine modded steel. Still perfecting the removal of it so I did add a small crease but of well, this had a paint chip or two anyway
While I did like the first image more it just was not working out the way I wanted it to.
While I did like the first image more it just was not working out the way I wanted it to.
Last edited by a moderator:
Finally decided to get my feet wet and tried out a few. Not as nice as most of what you guys have done but hopefully I can get better over time.
Immortals NL
Made my own Dark Knight Trilogy
Finally, slimmed down a Monsters Inc Jumbo
Immortals NL
Made my own Dark Knight Trilogy
Finally, slimmed down a Monsters Inc Jumbo
Sorry to bump, but any recommendations on the size of prints for each separate side and how to print them? Found images that will improve the steels i have but dont want to attempt the spine
Cheers
Great work everyone! I'm loving that Dark Knight trilogy artwork Munstarz!
Nice work mllNY and Munstarz40 
the templates we use are here just use the sides if you dont want to do the spine
Just print them at 50% for the double or 100% for the standard
the templates we use are here just use the sides if you dont want to do the spine
Just print them at 50% for the double or 100% for the standard
Nice work mllNY and Munstarz40
the templates we use are here just use the sides if you dont want to do the spine
Just print them at 50% for the double or 100% for the standard
Cheers man! Thats a small project to try, lets hope i dont destroy my HMV Drive!! No change im trying for the spines on these, may practice on an old one in future but may be safer to not try at all!
Any recommendations on the printing? Good materials etc? I only have my works printer to use
Nice work mllNY and Munstarz40
the templates we use are here just use the sides if you dont want to do the spine
Just print them at 50% for the double or 100% for the standard
Yes those are the templates I use.
---------- Post added at 07:36 PM ---------- Previous post was at 07:35 PM ----------
Finally decided to get my feet wet and tried out a few. Not as nice as most of what you guys have done but hopefully I can get better over time.
Immortals NL
Made my own Dark Knight Trilogy
Finally, slimmed down a Monsters Inc Jumbo
Really like that immortals Munstarz, but I don't wanna open my NL immortals, either one!
Cheers man! Thats a small project to try, lets hope i dont destroy my HMV Drive!! No change im trying for the spines on these, may practice on an old one in future but may be safer to not try at all!
Any recommendations on the printing? Good materials etc? I only have my works printer to use
Yeah I use the printers at work to
Not sure what paper it is but I know its glossy double sided paper specially for inkjet printers (which my work printers are) was £12 for 200 sheets from Rymans http://www.ryman.co.uk/0210250460/R...loss-Double-Sided-130gsm-200-Sheets/Productso not bad
Last edited:
Yeah I use the printers at work to
Cheers ive used the old magic wand tool in photoshop to just have one side and im going to copy the image for left then right separetly on to the template and print at 50%. Should hopefully do the trick for me?
Your In Time one looks awesome
First effort Only printed on normal paper aswell to try it out. Gonna flip an image over and move Mystique to the left. Normal paper looks fine under the plastic tbh but will buy some better quality stuff!
Edit: cant reverse the Xavier image or he'd be using the wrong hand to point to his head and my sad pathetic OCD self will not allow that so reversed Mystique so they go from the centre outwards
Edit: cant reverse the Xavier image or he'd be using the wrong hand to point to his head and my sad pathetic OCD self will not allow that
so reversed Mystique so they go from the centre outwards
Last edited by a moderator:
one more I forgot to post but this is the inside artwork the German AVP should have had. So I decided to create my own AVP set which houses both AVP and AVP Requiem blus.
Similar threads
